Product Information

Specifications                      

Swing over Bed                      30”   (760 mm)

Swing over Cross Slide           19”    (480 mm)

Center Height                         15”   (380 mm)

Bed width of ways                   18”   (460 mm)

Bed Casting Height       15.75”   (400 mm)

Spindle Motor Horsepower (Fanuc 18.5Kw)                30-HP Peak (25-HP 30-min. rated)

Big-Bore Spindle Option – Bore Size     10”    A2-15 spindle Big-Bore

Spindle Speeds      18-600 rpm (2-ranges)

Spindle Gear Ranges – 2-automatically selected gear ranges Low 18-186 rpm / High 60-600 rpm

Spindle Torque for 10” bore – low gear / high gear  1475 / 442 ft. lbs. (2000 / 600 Nm)

Workpiece weight limit when held in chuck                                           1,100 lbs.          (500kgs)

Workpiece weight limit when held by chuck and tailstock                           2,200 lbs.          (1,000kgs)

Workpiece weight limit when held by chuck, steady rest & tailstock           4,400 lbs.          (2,000kgs)

Rapid Traverse Feedrate X&Z        394 IPM  (10m/min)

X-Axis Cross slide travel          19-5/8”    (500 mm)

Z-Axis Longitudinal travel          96”

X-Axis Ball screw Diameter / Servo Motor Power        1.25” (32 mm) / 3.5-HP (2.5kw)

Z-Axis Ball screw Diameter / Servo Motor Power        2”      (50 mm) / 4.0-HP (2.9kw)

X-Axis Thrust         65 ft. lbs. (900 Kgf)

Z-Axis Thrust         98 ft. lbs. (1350 Kgf)

Cross slide dimensions WxL       39” x 10” (1000mm x 258mm)

Minimum input unit       0.0001” (0.001mm = 40 millionths”)

Tool Turret-        Hydraulic type / LS-200R

Tool stations – any combination of ID/OD tooling /Index time  8-stations / 0.4 second index O.D.

Tooling (additional I.D. & O.D. toolholders in stock)   1” tools w/8-tool clamps provided I.D.

Tooling (40mm when specified for metric users)   4-ID (1.5” bore) holders provided

Tailstock-Air-Assist Manual Positioning – Quill engraved with inch / metric quill graduations

Quill diameter        Ø5.0”      (125 mm)

Quill stroke (manual quill advance, hydraulic optional)   8″       (200 mm)

Quill taper       Morse Taper # 6

Electrical / Hydraulic / Coolant Systems

Power Requirements – FANUC 0i-TD control, motors & drives  30kVA, 220vac ±5%,

Hydraulic Motor Power 2-H.P.

Hydraulic Pressure       500 PSI / Mobil #32 oil

Coolant Pump        3/4-HP

Equipped With:

FANUC 0i-TD (With Manual Guide i)

24″ 3 Jaw Manual Chuck (10″ Bore)

Chip Conveyor

Steady Rest